Artificial turf is supplied in rolls

Artificial turf is supplied in rolls. The artificial sports surfaces comes the plan lay (kit), which determines exactly how the roles imposed. When handling rolls of artificial turf rolling is necessary to pay attention to the direction of lap.

The role of spaced cuts can be made from the back side snap-off knife or a very sharp knife. Cutting is done from the back side of artificial turf. First, the role of space throughout the area. Before gluing the joints rolls of artificial turf translated back to the underlying distribution of the belt. For gluing joints of artificial turf is applied glue (special two-component resin adhesive based on polyurethane) centered on the backing strip with a width of 30 cm. 

The adhesive is applied evenly on the base strip with a width of 20 cm with a notched trowel. It is necessary to avoid the formation of excess glue points. Artificial turf is folded back and slightly zaválcuje or other means to squeeze into the glue. For sporting purposes are carried out with silica sand backfill or EPDM or SBR granulate. Lines defining the playing area are cut according to the plan covering.

Installation of floor types - TURFSOCCER

The sand fills artificial turf can not use any sand. Must satisfy a number of requirements. Roundness of grains is the most important aspect, which has a direct effect on the cleavage of fibers lawn. If sand particles have sharp edges, can incise into the fibers and cause mechanical damage. Depending on the sliding properties and stability requirements for the use of different fractions. Another requirement is that the sand does not contain too much chalk. This can create excessive dusting, resulting in an artificial turf compaction. In addition, excessive content of chalk coloring muddies playground.

On the market there are two types of granules, used for artificial turf system, mostly used raw or reclaimed rubber, EPDM rubber SBR. Occasionally also offers recycled EPDM.